Activity for RealTerm: Serial/TCP Terminal

Anonymous posted a comment on discussion Help and Discussion

Anonymous — Mon, 27 Apr 2026 22:25:35 -0000

I have an application where I periodically update the screen. I send the cursor to the home position utilizing: [H, and then I redraw the screen. The escape code is sent as three bytes: 0x1B, 0X5B, 0x48. The cursor keeps flashing during screen updates and is distracting. I have tried [?25l, sent as six bytes. This does not work. How can I hide the cursor?

john pasha posted a comment on discussion Help and Discussion

john pasha — Wed, 22 Apr 2026 19:58:16 -0000

My serial device (TRUErng) will run for around 5 minutes or so, and then throw an access violation error. I have tried selecting alternate ports but still getting the error.

Anonymous posted a comment on discussion Help and Discussion

Anonymous — Thu, 09 Apr 2026 17:50:51 -0000

Also, I actually came to RealTerm after SerialTool overwhelmed me. As a beginner, things in RealTerm seem far easier to get a handle on. And SerialTool had some weird screen-sizing things going on in my version that were a bit annoying, plus of course tabs that would only lead to a popup telling you to get the pro version to access that feature. Like, I get it, but if I got the free version, maybe just have one 'Pro Features' tab instead of 3+

Anonymous posted a comment on discussion Help and Discussion

Anonymous — Fri, 21 Nov 2025 05:58:46 -0000

were can we get the spy drivers?

Anonymous posted a comment on discussion Help and Discussion

Anonymous — Wed, 01 Oct 2025 15:40:26 -0000

I have a serial data stream where a string is terminated by 'carriage return' only, I would like this to be overwritten on the display by subsequent strings until a 'line feed' is received. It appears that by default RealTerm adds a 'line feed' character after receiving a 'carriage return' and I cannot find a way to suppress this behaviour. I know that other terminal programs can do this (e.g. TeraTerm or MobaXterm) but i'm used to RealTerm and would prefer to keep using it. Thanks Jim

Anonymous posted a comment on discussion Help and Discussion

Anonymous — Fri, 01 Aug 2025 23:40:28 -0000

A framing error means that there was an edge where there should not be. It likely means that the data is longer than the uart expects. e.g. UART is set to 7 bits, 2 stop bits. Data is 8 bits long. A framing error occurs when the last data bit is a 0, when the uart expects a stop bit (1) Wrong baud rate could also be a cause, as could wrong data polarity.

Anonymous posted a comment on discussion Help and Discussion

Anonymous — Fri, 01 Aug 2025 17:38:44 -0000

How to resolve UART receiver framing error? thanks

Anonymous posted a comment on discussion Help and Discussion

Anonymous — Wed, 18 Jun 2025 14:04:31 -0000

Locksmith Course – Command line sendfile as a HEX format is just one of the many tech-forward skills covered in this training. This hands-on course blends traditional locksmith techniques with modern digital tools, perfect for those looking to advance in today’s evolving security industry. From decoding locks to handling advanced access systems, gain practical experience and valuable certifications that boost your career opportunities in both residential and commercial locksmithing sectors.

freider mattos modified a comment on a blog post

freider mattos — Tue, 20 May 2025 13:10:13 -0000

freider mattos posted a comment on a blog post

freider mattos — Tue, 20 May 2025 13:09:37 -0000

no sirve para ni monda, te amo

Anonymous posted a comment on discussion Help and Discussion

Anonymous — Thu, 30 Jan 2025 23:13:23 -0000

The issue occurs because RealTerm relies on registry keys to populate the list of available serial ports. If a serial port isn't properly registered, RealTerm might fail to detect it. Most likely, it is unable to find the registry entry HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\SERIALCOMM or lacks the necessary access permissions. This method of listing serial ports is not ideal, and modern software uses the SetupDiGetDeviceRegistryProperty function instead of directly accessing HARDWARE\DEVICEMAP\SERIALCOMM....

Anonymous posted a comment on discussion Help and Discussion

Anonymous — Wed, 15 Jan 2025 04:44:48 -0000

does realterm convert the file contents to ASCII when I send it using sendfile ?

efa posted a comment on ticket #64

efa — Thu, 02 Jan 2025 13:11:56 -0000

it's a pity to stop devel a such good terminal, but 6 years are much for security/patches

efa created ticket #64

efa — Thu, 02 Jan 2025 13:10:41 -0000

Is the software still developed?

Anonymous posted a comment on discussion Help and Discussion

Anonymous — Wed, 20 Nov 2024 21:36:01 -0000

The whole serial system has a bunch of buffering and of course is running on a time-sliced operating system. What you will get is the time the OS returns when Realterm goes to write the timestamp to file. This may bear some relationship with when the characters arrived at the connector pins. how many milliseconds from the previous byte The correct tool to do this is an oscilloscope or a logic analyser. i.e. a hardware device, not a computer.

Anonymous posted a comment on discussion Help and Discussion

Anonymous — Sun, 17 Nov 2024 13:37:43 -0000

Turn timestamp on id Display panel. Right click the TimeStamp label and enter hh:nn:ss.zzz

Anonymous posted a comment on discussion Help and Discussion

Anonymous — Wed, 30 Oct 2024 19:12:57 -0000

You need to work out if it is ASCII text, or two byte binary values. It probably is ASCII text, so just send those characters. It is irrelevant that they happen to represent hex values. If it was binary, you would also need to know if the numbers were big or small endian. Seems unlikely to be binary.

Anonymous posted a comment on discussion Help and Discussion

Anonymous — Wed, 30 Oct 2024 17:54:43 -0000

Hello, I have a display aircraft unit. There is a RS232 port to send a command. i would like to use the Realterm to send the commands to this unit. Following the manual, i have to send a command as: "316 0 0 FFFF" to reset the unit. i can send the command as characters text, but it seems this command is kind of hexadecimal number. Any suggestions, please. Thank you

Anonymous posted a comment on discussion Help and Discussion

Anonymous — Sun, 13 Oct 2024 22:16:42 -0000

I used RealTerm's command line parameters within a batch (.bat) file routine to do something similar. The code below logs a 10 second hex capture to capture.txt file, immediately deletes the capture.txt file and loops the process. (note: I'm not sure if the 'capture' option does an overwrite anyway, so there may be no need to delete the file. (See more command line parameters at https://tinyurl.com/msmskxp4)) @echo off setlocal :START realterm.exe baud=110 port=6 capfile=f:\capture.txt capsecs=10...

Anonymous posted a comment on discussion Help and Discussion

Anonymous — Tue, 16 Jul 2024 06:50:51 -0000

Thank you. Helped me too.

Anonymous posted a comment on discussion Help and Discussion

Anonymous — Tue, 02 Jul 2024 07:32:01 -0000

ERROR_3 IS WHAT?

Anonymous posted a comment on discussion Help and Discussion

Anonymous — Fri, 21 Jun 2024 04:46:53 -0000

i have same problem, did you solve it?

Anonymous posted a comment on discussion Help and Discussion

Anonymous — Fri, 31 May 2024 19:00:53 -0000

I just tried to install RealTerm from the I2CChip.com and it was blocked by MS Defender. I have attached a screen shot.

Anonymous posted a comment on discussion Help and Discussion

Anonymous — Sat, 11 May 2024 09:19:05 -0000

Did you mean SerialTool??

Anonymous posted a comment on discussion Help and Discussion

Anonymous — Sat, 11 May 2024 09:05:22 -0000

Hi all, I just wanted to introduce a new software that serves as a great alternative to the outdated RealTerm. It's called SerialPort, and it offers more features and is up-to-date. This multiplatform software runs on Windows, macOS, and Linux, and a free version is available. It fully supports Python scripting, allowing you to create your own scripts using the SerialTool GUI (https://www.serialtool.com/_en/serial-port-python.php). Additionally, it offers a SerialPort sniffing kernel driver, which...

Anonymous posted a comment on discussion Help and Discussion

Anonymous — Tue, 09 Apr 2024 23:32:39 -0000

I think you need to rewrite this, as I simply have no idea what question you are asking or what you want to do

Oscar Gonzalez posted a comment on discussion Help and Discussion

Oscar Gonzalez — Tue, 09 Apr 2024 16:06:39 -0000

Hello everyone, For my project I use a True Random Number Generator Hardware (TRNG), but I need to control the maximum value of the numbers that I read to 100(integer), and I need to read them in blocks of 10, for example: A first block would be: 20 80 50 15 12 09 18 35 32 96 The second would be: 33 02 87 09 05 10 19 28 41 63 like this until reaching the 250K block. Does anyone know how to do this? So far, using Realterm, I am able to read numbers from 0 to 255 (8bits) by capturing them continuously,...

Anonymous posted a comment on discussion Help and Discussion

Anonymous — Sat, 06 Apr 2024 14:01:29 -0000

Legend, Thanks Man!

Stefano posted a comment on discussion Help and Discussion

Stefano — Wed, 20 Mar 2024 08:46:31 -0000

hi there is a sample page with grid to project a PDF hand free ?

Anonymous posted a comment on discussion Help and Discussion

Anonymous — Fri, 15 Dec 2023 20:05:10 -0000

Currently no way to make a donation

Yazan zayn posted a comment on ticket #63

Yazan zayn — Sat, 02 Dec 2023 17:33:53 -0000

Hi Peter, Thank you for your detailed information! I have a CH341A and a CH341T USB converter, and I want to send and receive I2C messages using Realterm. I have successfully set up a COM port, and when I set the adapter to UART, the LED blinks when I press a button in Realterm. However, it doesn't work when I set the adapter to I2C&SPI. Could you let me know if it's possible to transmit I2C messages with these adapters using Realterm? If so, could you please explain how I can do that? Attached are...

Anonymous posted a comment on discussion Help and Discussion

Anonymous — Wed, 29 Nov 2023 00:57:00 -0000

Same question +1.

Anonymous posted a comment on discussion Help and Discussion

Anonymous — Mon, 30 Oct 2023 06:39:49 -0000

Our company would like to use the Realterm software for product testing. What is the licensing terms it uses? 2clause or 3clause? thnaks.

Anonymous posted a comment on discussion Help and Discussion

Anonymous — Sat, 28 Oct 2023 22:45:12 -0000

How can I make the terminal respond with the start command when it receives the query? Probably difficult to do in RT What I would try first is just sending the printer reply to the panel regularly. If you are lucky, the panel will just send the data when if it has the reply in its buffer, and not worry too much about the exact timing. Realterm can easily send stuff in a loop and capture the data sent back.

Anonymous posted a comment on discussion Help and Discussion

Anonymous — Sat, 28 Oct 2023 22:37:59 -0000

DumpFile does exactly what it says: dumps the file. If you put "0x34" in the file, that is what it will dump. If you want to send binary chars, use a binary/hex editor to make the file. See link above. If you are only sending small char groups, the instead of using the file dump, you could make a command file using one of the sendxxxx commands

Anonymous posted a comment on discussion Help and Discussion

Anonymous — Sat, 28 Oct 2023 22:35:04 -0000

Is there a way to echo the bytes sent from the Dump file to Port functionality? Not directly. Instead of using the file dump, you could make a command file using one of the sendxxxx commands

Christopher Paul posted a comment on discussion Help and Discussion

Christopher Paul — Fri, 27 Oct 2023 15:22:16 -0000

I have the same question. On the SEND tab, I can get the Send Numbers option to display the characters, but not the Send File option. Also, when I copy the the text from my SEND Numbers window, - 0x6B 0x35 0x44 0x35 0x03 - to a Notepad-generated .txt file and send that file, the result is different from that of the same text in the Send Numbers window. What am I doing wrong?

Patrick Lane posted a comment on discussion Help and Discussion

Patrick Lane — Fri, 27 Oct 2023 09:34:03 -0000

YES! Exactly that! So, I knew that and I guess I needed to hear someone else say it to come up with the idea that worked. I hooked my laptop up to the receive and common only and hooked the printer up to all three wires. The printer provided the start command and it printed at the printer and onto my laptop in the terminal. I was trying to get the SPY feature to work and I could not get it going. Does anyone have any experience with that? I would also like to figure out a way to not have the printer...

Anonymous posted a comment on discussion Help and Discussion

Anonymous — Thu, 26 Oct 2023 22:02:41 -0000

I think (from that printer manual) the enq is asking the printer for a status report. You are not sending a status report back, so the device thinks that there is no printer connected, and won't bother sending data. I would think that you need to connect the printer. Connect your laptop serial port/s across the printers TXD, and see what it is sending back in response to the ENQ The problem here is that if the panel sends the ENQ, and then immediately expects the printers reply, you will need a special...

Anonymous posted a comment on discussion Help and Discussion

Anonymous — Thu, 26 Oct 2023 14:07:54 -0000

OK, Thank you for those suggestions. That is similar or exactly the same as what I was finding online, I am trying to send those commands. To be a little more clear, I have disconnected the printer and hooked my laptop up instead. So the Panel is sending info to my com port thinking it is sending to a printer. I am trying to data capture what the panel is sending, but its not sending anything other than what the photo shows. 90% of the time when I do this with other panels, I don't have to send anything,...

Anonymous posted a comment on discussion Help and Discussion

Anonymous — Wed, 25 Oct 2023 18:23:51 -0000

The port tab controls flow settings. If there are no hardware flow control lines, then flow control must be something like xon/xoff sending an xon from the printer would usually start character flow. Thisprinter page suggests enq/stx is being used for status requests while xon/xoff is used for flow control. RT does allow you to change the actual chars used for xon/xoff

Anonymous posted a comment on discussion Help and Discussion

Anonymous — Wed, 25 Oct 2023 18:19:57 -0000

ENQ is ASCII code 0x05 (5) and STX is ASCII code 0x02 (2). ENQ is short for Enquiry and STD is shorts for Start of Test My guess is the printer sends and ENQ when ever it is ready to receive data. And assume that the data starts with an STX. However, I don't know how the printer tells the computer to stop sending when the printers buffer is full. Normal convention for serial printers is to use CTRL/S (DC3, XOFF) to stop the data send and CTRL/Q (DC1, XON) to resume it. Many serial printers use the...

Patrick Lane posted a comment on discussion Help and Discussion

Patrick Lane — Wed, 25 Oct 2023 17:54:00 -0000

I am not sure why it says Anonymous, I think I was logged in when I created this thread.

Anonymous posted a comment on discussion Help and Discussion

Anonymous — Wed, 25 Oct 2023 17:49:17 -0000

Hi! I am not new to the serial comm world, but I don't know a lot. I use it in a very specific way and that is about it. I hook up to equipment that has a serial printer output, data capture, then import it into excel to create a report. 90% of the equipment I hook up to run 9600, 8 bits, no parity, 1 stop bit, and no flow control. The last few days have been demoralizing. There is some sort of supervision on this panel and it will not dump text to my com port until I have sent it some sort of start...

rob4226 created ticket #65

rob4226 — Mon, 09 Oct 2023 02:08:36 -0000

Dark Mode

Dangerous modified a comment on ticket #111

Dangerous — Wed, 04 Oct 2023 10:33:56 -0000

Hi, I had this issue when I needed to re-install RealTerm. I use windows 10 and defender was blocking the install and deleting the setup.exe file. I had to disable virus protection by turning real time protection off after which it installed fine. To be safe I disconnetred the LAN before diabling defender, installed the program, then after a re-start the Windows defender re started but there were no issues with running the program. Hope this helps.

Dangerous posted a comment on ticket #111

Dangerous — Wed, 04 Oct 2023 10:33:27 -0000

Hi, I had this issue when I needed to re-install RealTerm. I use windows 10 and defender was blocking the install and deleting the setup.exe file. I had to disable virus protection by turning real time protection off after which it installed fine. Tio be safe I disconnetred the LAN before diabling defender, installed the program, then after a re-start the Windows defender re started but there were no issues with running the program. Hope this helps.

Rajeev Arora posted a comment on ticket #111

Rajeev Arora — Wed, 20 Sep 2023 12:07:47 -0000

Another instance of Windows Defender reporting a virus/threat.

Rajeev Arora created ticket #111

Rajeev Arora — Wed, 20 Sep 2023 12:05:48 -0000

Microsoft Defender reports PUA:Win32/Vigua.A virus present with RealTerm 3.0.1.44

Alan Bain created ticket #110

Alan Bain — Fri, 18 Aug 2023 16:07:25 -0000

Screen display has overlapping items on laptop

Anonymous posted a comment on discussion Help and Discussion

Anonymous — Mon, 31 Jul 2023 00:56:23 -0000

to the best of my knowledge real-term support has to be considered almost dead. there are more up to dated free software like SerialTool whoch are picking up very well and it is also multi-platform mostly for MAC lovers.

Anonymous posted a comment on discussion Help and Discussion

Anonymous — Mon, 24 Jul 2023 09:48:15 -0000

Realterm-> capture Octave: filename = "capture.txt"; fid = fopen(filename, "r"); csv = textscan(fid, "%f %f %f %f", -1, "Delimiter", ";"); fclose(fid); It's quite flexible, but requires perfect output data such, that they must be parseable perfectly.

Peter posted a comment on ticket #63

Peter — Sun, 25 Jun 2023 10:16:36 -0000

Hi Yazan, I would like to share my experience with you. I there are several different USB to RS485 converters, many of them are based on the CH341 chip. Mine is transparent blue and has a 5 screw connector: 5V GND GND B A I installed a windows driver for this CH341 based converter. The driver sets up an old fashioned COM port, (eg COM5) So, I believe the windows driver for the CH341 chip needs to be installed first. Then do a port scan within Realterm. Don't forget to click the change button I Was...

Yazan zayn created ticket #63

Yazan zayn — Sun, 18 Jun 2023 10:48:10 -0000

CH341a cannot be found in the port list.

Mike Katz posted a comment on discussion Help and Discussion

Mike Katz — Tue, 30 May 2023 18:53:45 -0000

Is there a way to echo the bytes sent from the Dump file to Port functionality? I use this frequently to test communication protocols and being able to see both sides of the conversation would be nice.

Mike Katz posted a comment on ticket #109

Mike Katz — Mon, 15 May 2023 19:10:29 -0000

Tested on 3.0.1.45Beta2 with the following results: display=0 colors=YWRPMB Actual Screen Colors Keyboard Red Port Yellow Send Fuchsia SpyTx not tested SpyRx not tested Background Blue display=0 colors=KWKKKB Actual Screen Colors Keyboard Red Port Yellow Send Fuchsia SpyTx not tested SpyRx not tested Background Blue display=1 colors=YWRPMB Actual Screen Colors Keyboard White Port White Send White SpyTx not tested SpyRx not tested Background Blue display=1 colors=KWKKKB Actual Screen Colors Keyboard...

Mike Katz posted a comment on ticket #108

Mike Katz — Wed, 10 May 2023 00:13:52 -0000

This also doesn't work when using an inifile that was saved from the misc menu.

Mike Katz posted a comment on ticket #109

Mike Katz — Tue, 09 May 2023 23:32:40 -0000

In the default all chars display mode.

Mike Katz created ticket #109

Mike Katz — Tue, 09 May 2023 23:29:45 -0000

Command line colors does not work for port

Mike Katz created ticket #108

Mike Katz — Tue, 09 May 2023 23:14:54 -0000

display=5 on command line causes crash

Chris created ticket #107

Chris — Tue, 09 May 2023 18:04:33 -0000

Dump File to Port Delay function uses LF not CR as stated

Anonymous posted a comment on discussion Help and Discussion

Anonymous — Mon, 01 May 2023 18:05:43 -0000

Is there a limit as to how many bytes (hex numbers) to transmit?

Anonymous posted a comment on discussion Help and Discussion

Anonymous — Wed, 26 Apr 2023 13:22:21 -0000

Hi, does Simon still provide the Spy driver function? I try to email to crun@users.sourceforge.net but it is bounced back.

Ramon C posted a comment on discussion Help and Discussion

Ramon C — Sat, 15 Apr 2023 10:46:28 -0000

ok, thanks Do you know what command line is user to activate the checkbox called Display that is in Capture tab. I haven't found anything about it in Realterm manual.

Ramon C modified a comment on discussion Help and Discussion

Ramon C — Sat, 15 Apr 2023 10:43:46 -0000

In Realterm version 3.0.1.44 in the Capture tab there is a checkbox called Display. What command line parameter it is necessary to add to activate this checkbox? I think this is a very important setting because at glance it's interesting to know if data are being or not. Thanks in advance.

Ramon C posted a comment on discussion Help and Discussion

Ramon C — Sat, 15 Apr 2023 02:59:00 -0000

In Realterm version 3.0.1.44 in the Capture tab there is a checkbox called Display. What command line parameter it is necessary to add to activate this checkbox? Thanks in advance.

Anonymous posted a comment on discussion Help and Discussion

Anonymous — Fri, 14 Apr 2023 14:08:43 -0000

Will the Delphi Community Edition solve the cost of updating Delphi. As for the cost of the certificate I have no idea how much that costs. As I run across realterm issues i will post bug reports.

Marco created ticket #106

Marco — Fri, 14 Apr 2023 12:53:07 -0000

Missing source files

Anonymous posted a comment on discussion Help and Discussion

Anonymous — Fri, 14 Apr 2023 01:00:24 -0000

INI files - which are just files cof the parameters https://realterm.sourceforge.io/#Command_Line_Parameters

Ramon C posted a comment on discussion Help and Discussion

Ramon C — Thu, 13 Apr 2023 23:40:18 -0000

Ok, thanks. Do you mean to create a .bat file with commands, for example? In this .bat file do you know if is it possible to add more than 255 characters as command lines?

Anonymous posted a comment on discussion Help and Discussion

Anonymous — Thu, 13 Apr 2023 23:20:02 -0000

https://sourceforge.net/p/realterm/discussion/228939/thread/426109330a/ Is it possible that Realterm program has a limitation on the length of command line parameters that it can accept, which overrides the system-wide limit set by the "CommandPromptMaxLength" registry key? It is possible - don't know. You can put commands into a command file, which is what you should do for long and complex commandlines

Anonymous posted a comment on discussion Help and Discussion

Anonymous — Thu, 13 Apr 2023 23:17:02 -0000

Source files should be in the installer. File a bug ticket for missing files.

Anonymous posted a comment on discussion Help and Discussion

Anonymous — Thu, 13 Apr 2023 23:08:41 -0000

Development releases are on realterm.i2cchip.com However, this version as many bugs and issues (especially with the scroll back buffer). Not many bug tickets though ... The general lack of discussion and bug reports, means not much reason to make a new version. So make bug reports. If a bug is a regression, try to pin down which version it appears in. (It is also a factor that donations don't meet the cost of the code signing certificate and an update to Delphi anymore. I no longer do this kind of...

Mike Katz posted a comment on discussion Help and Discussion

Mike Katz — Thu, 13 Apr 2023 14:23:42 -0000

I am a long term realterm user. I am currently using version 3.0.1.44. However, this version as many bugs and issues (especially with the scroll back buffer). There seems to be development and bug fixes going on here but the latest download is for version 2.0.0.70 dated 2014. Has anyone made an updates to realterm available? I have tried other terminal programs but none come close to realterm since Telix for DOS in the '90s. Thank you

Anonymous posted a comment on discussion Help and Discussion

Anonymous — Thu, 13 Apr 2023 03:13:37 -0000

Is it possible to enable this Dsilpay checkbox with a command line parameter?

Ramon C posted a comment on discussion Help and Discussion

Ramon C — Thu, 13 Apr 2023 02:52:46 -0000

I have two questions: 1) It is possible to set a checkbox called Display that is in Capture tab to check data as they are logging in the window of Realterm. I don't know if it possible to set this checkbox on by a command line parameter in the properties of a Realterm direct access in command line. 2) In all case, I have 255 parameters in a direct access command line and I have not more free space. I have modify the registry in HKEY_LOCAL_MACHINE\Software\Microsoft\Command Processor and created a...

Anonymous posted a comment on discussion Help and Discussion

Anonymous — Mon, 03 Apr 2023 12:40:02 -0000

Hi, I would like to compile the source code with some minor changes. I have downloaded the source code but it seems that some source files are missing (e.g. ConsoleConnector.pas). Where can I find the missing resources? thanks

Anonymous posted a comment on discussion Help and Discussion

Anonymous — Sat, 18 Mar 2023 13:16:18 -0000

Excellent, thank you

Anonymous posted a comment on discussion Help and Discussion

Anonymous — Thu, 16 Mar 2023 14:04:12 -0000

(for a 64-bit windows machine)

Anonymous posted a comment on discussion Help and Discussion

Anonymous — Thu, 16 Mar 2023 14:02:24 -0000

Hey there, first of all, RealTerm is a great tool, it's amazing to use it! Thank you for doing this work! I would love to use it with the Spy-feature with it and to get the drivers. I understand the development has costs and work associated with this, so I send the donation for people on their own and tried to send this e-mail asking for drivers. From trying to sent to the address crun@users.sourceforge.net I get a message the e-mail is undeliverable. Can anyone tell me how to get the drivers or...

Anonymous posted a comment on discussion Help and Discussion

Anonymous — Thu, 16 Mar 2023 09:12:56 -0000

I too occasionally have the same error and have installed version 44

Anonymous posted a comment on discussion Help and Discussion

Anonymous — Tue, 14 Mar 2023 11:15:54 -0000

Can anyone help me by sharing the manual for real term program were i can reterive the data and work in manual on Matlab /octave and see the output

Anonymous posted a comment on discussion Help and Discussion

Anonymous — Tue, 07 Feb 2023 14:42:27 -0000

Hello dear friends. I send packects from a MCU to Realterm and this packet includes differenet uint8_t HEX values. Each time the terminal responses back with a "Realterm" string. Can you tell me please how can I avoid this behavior? Sincerely, Genadi.

Anonymous posted a comment on discussion Help and Discussion

Anonymous — Wed, 01 Feb 2023 18:14:56 -0000

I have an error that just recently started popping up. "The semaphore timeout period has expired" and I can scan the ports and select one but it never opens. Any ideas on how to fix this?

Anonymous posted a comment on discussion Help and Discussion

Anonymous — Thu, 19 Jan 2023 03:54:36 -0000

At a guess V2 is sending Backspace (0x08), while V3 is sending DEL(0x7F)

Anonymous posted a comment on discussion Help and Discussion

Anonymous — Thu, 19 Jan 2023 03:53:19 -0000

BTW, you have too much RC on the serial line for this baud rate (left hand picture) Don't expect it to work reliably. When sending single high bits, each bit should look like the right picture i.e. coming up to a flat top, not the left one i.e. still rising.

Anonymous posted a comment on discussion Help and Discussion

Anonymous — Wed, 18 Jan 2023 20:02:49 -0000

They are different chars. I would suggest using RT in loopback to see what the character being sent is. i.e. join RX to TX . (You can also use two instances and loopback via TCP/IP)

Anonymous posted a comment on discussion Help and Discussion

Anonymous — Wed, 18 Jan 2023 15:43:54 -0000

First: i like this Terminal Program !! Great Tool So i try to connect via serial -COM-Port to a KIM-1 Computer. This work´s via Adapter I/O and TTY. It works fine with Baud-rate lower then 2400. At 4800 Baud sometime works, somtime not. That is not a problem with RealTerm, but the KIM. I figured out, that RealTerm in Version 2 makes an different Signal - Peek for RUB-Out to Version 3. The RUB-Out is initialized with Key 'DEL, first communication handle with the KIM-1, to measure the Baud-rate. The...

Anonymous posted a comment on discussion Help and Discussion

Anonymous — Wed, 28 Dec 2022 04:27:45 -0000

Thank you!

Anonymous posted a comment on discussion Help and Discussion

Anonymous — Tue, 20 Dec 2022 21:50:12 -0000

I’m interested in using the RealTerm software for our project where we must send 32 bits of 1s and 0s serially, followed by 1.54 mS of delay (represented by 0s), all at a baud rate of 225 kb/s. This signal is then repeated indefinitely. Is the RealTerm software capable of this application? My initial concern after reading the manual was that the Send function can only send bits of the value 255 (integer? i.e 11111111 in binary) at a time, but maybe I misunderstood.

Anonymous posted a comment on discussion Help and Discussion

Anonymous — Tue, 29 Nov 2022 14:39:53 -0000

how can i solve this

Anonymous posted a comment on discussion Help and Discussion

Anonymous — Tue, 22 Nov 2022 15:43:12 -0000

Hi, I send many commands to configure HC05 BLE device. I love that each new added command I send is saved and can then be resent by pulling down the list. Is it possible to save all the commands I have entered so that they are available for a session later on? Or can I import or use INI file to load commands to send? The docs are not clear...only one mention of saving commands by using the MISC tab but there is nothing there for the purpose. Any ideas? Thanks, Bob!

Anonymous posted a comment on discussion Help and Discussion

Anonymous — Tue, 25 Oct 2022 07:05:53 -0000

Im using RealTerm at 2,000,000 Baud and logging continuously and saving a file every 15mins Realterm periodically crashes seemingly at random and i have to check via a remote desktop app every hour to not lose data Does this happen to anyone else? is it the high baud rate? Im even wondering whether its to do with logging into the remote desktop app (teamviewer/anydesk) or other apps in the background It seems to hapoen less with realterm minimized but no firm data to support this

Simon Bridger posted a comment on discussion Help and Discussion

Simon Bridger — Wed, 17 Aug 2022 00:53:38 -0000

On the Send tab

Anonymous posted a comment on discussion Help and Discussion

Anonymous — Tue, 09 Aug 2022 16:13:14 -0000

Where is the crc function in the UI?

Simon Bridger posted a comment on discussion Help and Discussion

Simon Bridger — Wed, 27 Jul 2022 05:13:21 -0000

Probably your are misunderstanding S2, S2. They don't send strings, they just load the editboxes https://realterm.sourceforge.io/#Command_Line_Parameters I can't use Win10 at present, but possibly permissions need to be changed, or perhaps the ongoing security changes have broken interwindow comms. You don't seem to be needing to do it anyway, in the example batch file.

Anonymous posted a comment on discussion Help and Discussion

Anonymous — Tue, 26 Jul 2022 04:24:53 -0000

@crun please provide your feedback on this. It will be a great help , if you can provide feedback as soon as possible .

Anonymous posted a comment on discussion Help and Discussion

Anonymous — Tue, 26 Jul 2022 04:22:58 -0000

version used : Realterm_3.0.1.44 OS : windows 10

Andy Sapuntzakis posted a comment on ticket #40

Andy Sapuntzakis — Mon, 25 Jul 2022 04:52:22 -0000

on the receive side, realterm currently choose between raw (hex) data or interpreted as ASCII. COBS would add another option, where the hex stream would be shown as 0-delimited packets, 1 per line on the transmit side, there could be COBS-encoding of individual packets specified in the Send tab, as well as from a file where each packet is delimited by a CR/LF newline

Andy Sapuntzakis posted a comment on ticket #40

Andy Sapuntzakis — Sun, 17 Jul 2022 22:26:27 -0000

The wikipedia page above provides encoder and decoder example C code.