Activity for dxf2gcode

kishor posted a comment on ticket #176

kishor — Sun, 11 Jan 2026 09:07:50 -0000

I see, will check with smaller tolerances. Thanks!

chrisko modified ticket #176

chrisko — Wed, 07 Jan 2026 19:49:37 -0000

pocketing problem

chrisko posted a comment on ticket #176

chrisko — Wed, 07 Jan 2026 19:43:04 -0000

Hi Kishor, i think this is a issue with the tolerances of geometries and you just did hit a combination of geometry and tool diameter which is hitting a unstable intersection detection. Can you continue your work by changing to combinations which are working for you? This is a bigger issue, which can not be solved easy (as i am not the one who is the expert for this part of the code). regards Christian

kishor posted a comment on ticket #176

kishor — Tue, 06 Jan 2026 07:14:18 -0000

also the program crashed when pocketing 3.3mm diameter circle using 2mm tool bit, but was ok when 1mm bit was selected.

kishor posted a comment on ticket #176

kishor — Tue, 06 Jan 2026 06:23:01 -0000

the middle part is empty when pocketing

kishor posted a comment on ticket #176

kishor — Tue, 06 Jan 2026 06:20:36 -0000

the middle part is empty when pocketing

chrisko posted a comment on ticket #176

chrisko — Fri, 26 Dec 2025 20:47:37 -0000

Can you add a picture of what you see in dxf2gcode (the issue you discribed)

kishor created ticket #176

kishor — Wed, 24 Dec 2025 16:50:11 -0000

pocketing problem

Alexey Diyachenko created ticket #175

Alexey Diyachenko — Tue, 16 Dec 2025 13:48:55 -0000

Add command line parameter for choose config directory

dxf2gcode updated /linux.installer.sh

dxf2gcode — Sat, 20 Sep 2025 03:35:04 -0000

Tommy T created ticket #174

Tommy T — Thu, 04 Sep 2025 07:01:26 -0000

Potential Bug: Inches to MM

dxf2gcode updated /linux.installer.sh

dxf2gcode — Sun, 24 Aug 2025 00:54:04 -0000

Patrick Bagnall posted a comment on ticket #166

Patrick Bagnall — Tue, 08 Apr 2025 11:37:18 -0000

Yes that would be great thank you. Yes the code moves multiple parts at once. I also think i have found a good way of checking if a shape is in another shape if we can assume no shapes intersect upon opening the file. Pat

chrisko posted a comment on ticket #166

chrisko — Sun, 06 Apr 2025 10:44:41 -0000

Hi Patrick, I'm fine, thanks for asking. If you want to share your code and want me to take a look into it, you can create a fork and send me a link, or i can also give you developers right's for the project and you can create a branch to work on. Whatever you prefer, but i think the best way would be to grant you developers rights. Now to the 2nd question. If you want to move hole shapes which are in a shape, i think there is not easy way to it. You need to check if there are inside a other shape...

Patrick Bagnall posted a comment on ticket #166

Patrick Bagnall — Sat, 05 Apr 2025 17:02:54 -0000

Hey chris. I hope you are well. I have gotten it to a point where it seems to work quite well. Now, if you move the shapes in the interface the outputted gcode as well as the displayed optimized routes change accordingly. left to do is to make it so that when you select a shape, if it has any, the hole shapes that are part of it will be automatically selected too. I would like some advice on how to do this if you wouldnt mind. Also if you are open to it I would like to show you what I've written...

chrisko posted a comment on ticket #166

chrisko — Wed, 02 Apr 2025 05:05:59 -0000

The breaks are an interrupt in the contour. It's calculating the intersections to the break layer and removes parts of the lines which are interesting with the geometry on the break layer. Didn't look at it in details, but that's my fast guess chrisko christi_ko@users.sourceforge.net schrieb am Di., 1. Apr. 2025, 19:21: Hi Patrick, it's just a way of implementation which was used for adding the start / stop moves to scaled or rotated inserts. Could be done different, but it did grow in this direction....

chrisko posted a comment on ticket #166

chrisko — Tue, 01 Apr 2025 17:20:51 -0000

Hi Patrick, it's just a way of implementation which was used for adding the start / stop moves to scaled or rotated inserts. Could be done different, but it did grow in this direction. Regards Christian Patrick Bagnall pkbagnall@users.sourceforge.net schrieb am Di., 1. Apr. 2025, 17:31: hi christian, what is the purpose of the absolute geometry. I see it used, i understand how it is used but I dont know why [tickets:#166] https://sourceforge.net/p/dxf2gcode/tickets/166/ feature requests Status: New...

Patrick Bagnall posted a comment on ticket #166

Patrick Bagnall — Tue, 01 Apr 2025 17:11:01 -0000

More specifically this line in shape.py line line 434. new_geos = PostPro.breaks.getNewGeos(new_geos). I dont understand what it is doing as the correct geos are already stored in new_geos

Patrick Bagnall posted a comment on ticket #166

Patrick Bagnall — Tue, 01 Apr 2025 15:31:28 -0000

hi christian, what is the purpose of the absolute geometry. I see it used, i understand how it is used but I dont know why

Ryan Aukes posted a comment on ticket #173

Ryan Aukes — Fri, 28 Mar 2025 20:23:04 -0000

Hi Christian, Thanks for your reply! Do you have any plans to implement it for the drag knife too, since it is already there for milling? And about the overcut feature, is that present for drag knife cutting? I honestly don't know if overcut is the right name, but I mean continue cutting for a small length (1 mm for example) to make sure the part is fully cut. Thank you for creating this project. It is already a great piece of software as it is. I couldn't find any other free or cheap software that...

chrisko posted a comment on ticket #173

chrisko — Fri, 28 Mar 2025 19:01:33 -0000

Hi Ryan, i am sorry, but the lead in and lead out function is not implemented for drag knife up to now. It's only there fore milling right now. best regards Christian

Ryan Aukes created ticket #173

Ryan Aukes — Fri, 28 Mar 2025 14:24:11 -0000

Lead in and overcut options?

chrisko modified ticket #171

chrisko — Sun, 23 Mar 2025 19:28:53 -0000

Gcode incorrect when using breaks.

chrisko posted a comment on ticket #171

chrisko — Sun, 23 Mar 2025 19:28:53 -0000

No problem at all. I will close the ticket ;-)

chrisko modified ticket #172

chrisko — Sun, 23 Mar 2025 19:27:42 -0000

Letters and numbers

chrisko posted a comment on ticket #172

chrisko — Sun, 23 Mar 2025 19:27:27 -0000

Hi Angelo, you need to convert the letters and numbers into polylines. Just ask google how to do this in your CAD tool. regards Christian

Angelo created ticket #172

Angelo — Sun, 23 Mar 2025 11:32:27 -0000

Letters and numbers

Mr Anthony Ollerton posted a comment on ticket #171

Mr Anthony Ollerton — Thu, 27 Feb 2025 10:25:11 -0000

Jobs came out fine. sorry for any confusion caused.

Mr Anthony Ollerton posted a comment on ticket #171

Mr Anthony Ollerton — Wed, 26 Feb 2025 18:16:07 -0000

Think I may have been mistaken. I was visualising the G code with NC viewer and Jviewer both of which seem to show errors. Have just used UGS and the output seems to be as expected. Will see how it goes on the CNC.

Mr Anthony Ollerton created ticket #171

Mr Anthony Ollerton — Wed, 26 Feb 2025 16:18:08 -0000

Gcode incorrect when using breaks.

chrisko posted a comment on ticket #166

chrisko — Mon, 24 Feb 2025 17:52:49 -0000

Thanks for the update. Just let me know if you need any guidance.

chrisko posted a comment on ticket #170

chrisko — Mon, 24 Feb 2025 17:50:50 -0000

Hi Vic, also checked it with the current development version. Also works without issues. https://sourceforge.net/projects/dxf2gcode/files/Development/

Vic posted a comment on ticket #170

Vic — Sat, 22 Feb 2025 04:08:31 -0000

And now I found it works on a 2017 version.

Vic created ticket #170

Vic — Sat, 22 Feb 2025 04:02:05 -0000

DXF File Importing Failure on Windows11

Patrick Bagnall posted a comment on ticket #166

Patrick Bagnall — Fri, 21 Feb 2025 13:53:27 -0000

Hi Christian. Thank you for your guidance. I am ok for now, making steady progress.

Fuyun Ling posted a comment on ticket #169

Fuyun Ling — Tue, 18 Feb 2025 02:49:10 -0000

Hi, As I said before, I solved the previous problem by using Python 3.9 instead of 3.12. However, when doing the compilation, I had the two following errors. Let's look at the first one first. The second one may the result of the first one.1.C:\dxf2gcode>python.exe ./make_tr.py Using Windows platform tools "C:\Python39\Scripts/pylupdate5.exe" and "C:\Program Files (x86)\Qt Designer\lrelease.exe" Updating translations from source files...C:\Python39\Scripts/pylupdate5.exe dxf2gcode.proRemoving sourcecode...

chrisko posted a comment on ticket #169

chrisko — Mon, 17 Feb 2025 12:53:56 -0000

Hi Fuyung, did you check if the translations files have been copied to the expected locataion according to the failure message? https://sourceforge.net/p/dxf2gcode/sourcecode/ci/develop/tree/source/i18n/ I use the python version 3.11, could be also a compatibility problem with your version. Can you try python 3.11 ...

Fuyun Ling posted a comment on ticket #169

Fuyun Ling — Sun, 16 Feb 2025 18:36:59 -0000

Hi, chrisko: Please take a look into the latest email that I sent on Sat, Feb 15 at 11:25 PM. The two new problems that I mentioned there were not mentioned in your two latest replies you sent here.Thanks!Fuyun On Sunday, February 16, 2025 at 04:32:17 AM PST, chrisko christi_ko@users.sourceforge.net wrote: status: New --> WontFix assigned_to: chrisko Priority: High --> Medium OpSys: --> Windows 11 Type: Patch --> Other [tickets:#169] Got error in Windows 11 installation Status: WontFix Created: Fri...

chrisko posted a comment on ticket #166

chrisko — Sun, 16 Feb 2025 12:35:08 -0000

Hi Patrick, do you need more input. Didn't get any feedback here up to now ...

chrisko modified ticket #167

chrisko — Sun, 16 Feb 2025 12:34:09 -0000

Postprocessor not applied if multiple avaliable

chrisko modified ticket #168

chrisko — Sun, 16 Feb 2025 12:33:03 -0000

"latest" downloads file with "old", installer complains about version

chrisko modified ticket #169

chrisko — Sun, 16 Feb 2025 12:32:11 -0000

Got error in Windows 11 installation

chrisko posted a comment on ticket #169

chrisko — Sun, 16 Feb 2025 12:31:39 -0000

That's what i expected. The "new" error seems to come from some missing files. Nothing critical.

Fuyun Ling posted a comment on ticket #169

Fuyun Ling — Sun, 16 Feb 2025 07:25:20 -0000

I solved the previous problem by using Python 3.9 instead of 3.12. However, when doing the compilation, I had the two following errors: 1.C:\dxf2gcode>python.exe ./make_tr.pyUsing Windows platform tools "C:\Python39\Scripts/pylupdate5.exe" and "C:\Program Files (x86)\Qt Designer\lrelease.exe" Updating translations from source files...C:\Python39\Scripts/pylupdate5.exe dxf2gcode.proRemoving sourcecode references from translation files... Removing tags from i18n/dxf2gcode_de.ts Removing...

Fuyun Ling posted a comment on ticket #169

Fuyun Ling — Sun, 16 Feb 2025 04:32:33 -0000

I just folowed instructions in the readme.txt for windows: C:> pip3 install sip PyQt5 PyOpenGL pyqt5-tools cx-Freeze configobj Fuyun On Friday, February 14, 2025 at 10:57:28 AM PST, chrisko christi_ko@users.sourceforge.net wrote: This is a problem while installing pyQT i guess. How did you install dxf2gcode, pleas explain your steps to do so. [tickets:#169] Got error in Windows 11 installation Status: New Created: Fri Feb 14, 2025 01:54 AM UTC by Fuyun Ling Last Updated: Fri Feb 14, 2025 01:54 AM...

chrisko posted a comment on ticket #169

chrisko — Fri, 14 Feb 2025 18:57:26 -0000

This is a problem while installing pyQT i guess. How did you install dxf2gcode, pleas explain your steps to do so.

Fuyun Ling created ticket #169

Fuyun Ling — Fri, 14 Feb 2025 01:54:13 -0000

Got error in Windows 11 installation

dxf2gcode updated /linux.installer.read_me.txt

dxf2gcode — Thu, 13 Feb 2025 20:01:05 -0000

dxf2gcode updated /linux.installer.read_me.txt

dxf2gcode — Thu, 13 Feb 2025 20:00:05 -0000

dxf2gcode updated /linux.installer.sh

dxf2gcode — Thu, 13 Feb 2025 20:00:05 -0000

dxf2gcode updated /Development/dxf2gcode.zip

dxf2gcode — Thu, 13 Feb 2025 19:20:03 -0000

chrisko committed [ab2aa4] on SourceCode

chrisko — Thu, 13 Feb 2025 17:41:21 -0000

Updated st-setup.py with correct data format.

spicer modified a comment on ticket #168

spicer — Sat, 08 Feb 2025 08:18:31 -0000

Edit the line 48 in st-setup.py from version='2024-11-02', to version='2024.11.2', or version='20241102', That's only a syntax error for Python since 3.10 ^^

spicer modified a comment on ticket #168

spicer — Sat, 08 Feb 2025 08:16:30 -0000

Edit the line 48 in st-setup.py from version='2024-11-02', to version='2024.11.2', or version='20241102', That's only a syntax error for Python since 3.10 ^^

spicer modified a comment on ticket #168

spicer — Sat, 08 Feb 2025 08:14:57 -0000

Edit the line 48 in st-setup.py from version='2024-11-02', to version='2024.11.2', or version='20241102', That's only a syntax error for Python 3.10+ ^^

spicer modified a comment on ticket #168

spicer — Sat, 08 Feb 2025 08:13:55 -0000

Change the line 48 in st-setup.py from version='2024-11-02', to version='2024.11.2', or version='20241102', That's only a syntax error for Python 3.10+ ^^

spicer modified a comment on ticket #168

spicer — Sat, 08 Feb 2025 08:11:49 -0000

Change the line 48 in st-setup.py from version='2024-11-02', to version='2024.11.2', That's only a syntax error for Python 3.10+ ^^

spicer modified a comment on ticket #168

spicer — Sat, 08 Feb 2025 08:10:28 -0000

Change the line 48 in st-setup.py from version='2024-11-02', to version='2024.11.2', That's only a syntax error ^^

spicer modified a comment on ticket #168

spicer — Fri, 07 Feb 2025 18:07:34 -0000

Change the line 48 in st-setup.py from version='2024-11-02', to version='2024.11.2',

spicer posted a comment on ticket #168

spicer — Fri, 07 Feb 2025 18:00:20 -0000

Change the line 45 in st-setup.py from version='2024-11-02', to version='2024.11.2',

Guenter Grau created ticket #168

Guenter Grau — Fri, 07 Feb 2025 17:40:21 -0000

"latest" downloads file with "old", installer complains about version

12labs modified a comment on ticket #167

12labs — Thu, 06 Feb 2025 03:52:43 -0000

thank you chrisko, I have one other recommendation I think that would be very helpful. My laptops are all native 1400x900 Resolution, as well as my desktops. My vision is not so good, so that is about the highest resolution my eyeballs can handle, Luckily it is still a common resolution for low cost laptops and desktop monitors. Unfortunately the post processor configuration dialogue does not fit on the screen at this resolution. If you could make the dialogue a little bit more compact, so it fits...

12labs modified a comment on ticket #167

12labs — Thu, 06 Feb 2025 03:51:54 -0000

12labs modified a comment on ticket #167

12labs — Thu, 06 Feb 2025 03:51:23 -0000

thank you chrisko, I have one other recommendation I think that would be very helpful. My laptops are all native 1400x900 Resolution, as well as my desktops. My vision is not so good, so that is about the highest resolution my eyeballs can handle, Luckily it is still a common resolution for low cost laptops a desktop monitors. Unfortunately the post processor configuration dialogue does not fit on the screen at this resolution. If you could make the dialogue a little bit more compact, so it fits...

12labs modified a comment on ticket #167

12labs — Thu, 06 Feb 2025 03:49:49 -0000

thank you chrisko, I have one other recommendation I think that would be very helpful. My laptops are all 1400x900 Resolution, as well as my desktops. My vision is not so good, so that is about the highest resolution my eyeballs can handle, Luckily it is still a common resolution. Unfortunately the post processor configuration dialogue does not fit on the screen at this resolution. If you could make the dialogue a little bit more compact, so it fits in that resolution, It would be very beneficial...

12labs modified a comment on ticket #167

12labs — Thu, 06 Feb 2025 03:47:43 -0000

12labs posted a comment on ticket #167

12labs — Thu, 06 Feb 2025 03:47:26 -0000

chrisko committed [e8dc58] on SourceCode

chrisko — Wed, 05 Feb 2025 21:18:23 -0000

Changes to postprocessor configuration description according to: https://sourceforge.net/p/dxf2gcode/tickets/167/

chrisko posted a comment on ticket #167

chrisko — Wed, 05 Feb 2025 21:16:59 -0000

Thanks for the recommandation, i will change that for the next version ....

12labs posted a comment on ticket #167

12labs — Wed, 05 Feb 2025 14:33:43 -0000

thanks you, that works, but I must restart application after making any changes to a post processor config, otherwise sometimes it may not save using correct config. not sure why. I do have two recommendations for the Post Processor Configuration Dialog. 1) "Choose configuration file:" could say "Choose config to edit:" to eliminate confusion. I though I was choosing the config to be applied to the loaded DXF file. 2) "Output format description:" could say "Output format description (should be unique):"...

spicer modified a comment on ticket #167

spicer — Sat, 01 Feb 2025 22:09:43 -0000

Here is the solution (thanks to @chrisko). The whole thing is a bit strangely structured ;) The postprocessor can be selected in the export dropdown menu (@ bottom right).

spicer modified a comment on ticket #167

spicer — Sat, 01 Feb 2025 22:05:26 -0000

The postprocessor can be selected in the export dropdown menu (@ bottom right).

spicer posted a comment on ticket #167

spicer — Sat, 01 Feb 2025 22:04:38 -0000

The postprocessor can be selected in the export dropdown menu (@ bottom right).

12labs posted a comment on ticket #167

12labs — Fri, 31 Jan 2025 16:52:46 -0000

thanks spicer, that is exactly what is happening, selected postprocessor configuration is not applied to output file and alphabetically first cfg is always used.

spicer posted a comment on ticket #167

spicer — Thu, 30 Jan 2025 21:57:53 -0000

That's where chrisko needs to look. The selected postprocessor configuration is not saved and the alphabetically first cfg is always used.

12labs modified a comment on ticket #167

12labs — Thu, 30 Jan 2025 20:58:16 -0000

Here is a link to the Live Debian Image if you want to try it (does not require installing the OS, it will run from USB drive and OS will run in memory)... https://cdimage.debian.org/debian-cd/current-live/amd64/iso-hybrid/debian-live-12.9.0-amd64-xfce.iso after the live loads, open a terminal and... sudo update sudo upgrade sudo apt install python3 cd /dev/shm wget https://raw.github.com/ltspicer/dxf2gcode.linux.installer/main/linux.installer.sh chmod a+x linux.installer.sh ./linux.installer.sh

12labs modified a comment on ticket #167

12labs — Thu, 30 Jan 2025 20:57:31 -0000

Here is a link to the Live Debian Image if you want to try it (does not require installing the OS, it will run from USB drive and OS will run in memory)... https://cdimage.debian.org/debian-cd/current-live/amd64/iso-hybrid/debian-live-12.9.0-amd64-xfce.iso after the live loads, open a terminal and... sudo update sudo upgrade cd /dev/shm wget https://raw.github.com/ltspicer/dxf2gcode.linux.installer/main/linux.installer.sh chmod a+x linux.installer.sh ./linux.installer.sh

12labs posted a comment on ticket #167

12labs — Thu, 30 Jan 2025 20:56:22 -0000

spicer posted a comment on ticket #167

spicer — Thu, 30 Jan 2025 20:51:22 -0000

Yes, the installer will install the developer version, if Python version is 3.10 or higher.

12labs posted a comment on ticket #167

12labs — Thu, 30 Jan 2025 20:48:37 -0000

I just ran this command to install... wget https://raw.github.com/ltspicer/dxf2gcode.linux.installer/main/linux.installer.sh chmod a+x linux.installer.sh ./linux.installer.sh then the prompts were.. (only option was developer version) Should I install pip (y/n) Y Do you want install... echo "2 ...a developer version" echo "3 Quit installer" 2 I will now install. Are you ready (y/n) Y

chrisko posted a comment on ticket #167

chrisko — Thu, 30 Jan 2025 19:35:04 -0000

I just saw, that there is a difference between the master and development branch. Which one did you try with the installer. I think your able to select during the installation process ...

12labs modified a comment on ticket #167

12labs — Thu, 30 Jan 2025 18:54:14 -0000

In windows it does work, in linux debian it is not working. I checked the headers in the output file, and the config is wrong, it is using what was not selected. For both files it uses "(Used Postprocessor: postpro_config.cfg) " even though that was not selected at time of export. I made two configs again, this time named Test1 and Test2 I change "G21" in each config to be TEST1 and TEST2 instead of G21 (just so I can see what config is being applied) ... the default config is what is applied no...

12labs modified a comment on ticket #167

12labs — Thu, 30 Jan 2025 18:52:37 -0000

In linux it does not work. I checked the headers in the output file, and the config is wrong, it is using what was not selected. For both files it uses "(Used Postprocessor: postpro_config.cfg) " even though that was not selected at time of export. I made two configs again, this time named Test1 and Test2 I change "G21" in each config to be TEST1 and TEST2 instead of G21 (just so I can see what config is being applied) ... the default config is what is applied no matter what is selected, "sometimes"...

12labs posted a comment on ticket #167

12labs — Thu, 30 Jan 2025 18:48:39 -0000

In linux it does not work. I made two configs again, this time named Test1 and Test2 I change "G21" in each config to be TEST1 and TEST2 instead of G21 (just so I can see what config is being applied) ... the default config is what is applied no matter what is selected, "sometimes" I can get one of the configs to start working after opening and closing the app a few times, whatever starts working gets stuck as the default and cannot be changed. only work around is delete all postproccessor configs...

chrisko modified a comment on ticket #167

chrisko — Thu, 30 Jan 2025 18:04:03 -0000

Just checked it with my development version (on a windows PC). Seems like it's working fine. Did you check the header of the exported file too? See my two examples below: (Generated with: DXF2GCODE) (Version: Py3.11.1 PyQt5.15.8, Date: $Date$) (Erstellt aus der Datei: D:/GIT/dxf2gcode-sourcecode/dxf/test.dxf) (Used Postprocessor: Mach3.cfg) (Beschreibung des Ausgabeformats: G-CODE for Mach3) (Zeit: Thu Jan 30 18:55:03 2025) and (Generated with: DXF2GCODE) (Version: Py3.11.1 PyQt5.15.8, Date: $Date$)...

chrisko modified a comment on ticket #167

chrisko — Thu, 30 Jan 2025 18:03:28 -0000

chrisko modified a comment on ticket #167

chrisko — Thu, 30 Jan 2025 18:02:11 -0000

chrisko posted a comment on ticket #167

chrisko — Thu, 30 Jan 2025 18:01:27 -0000

Just checked it with my development version. Seems like it's working fine. Did you check the header of the exported file too? See my two examples below: (Generated with: DXF2GCODE) (Version: Py3.11.1 PyQt5.15.8, Date: $Date$) (Erstellt aus der Datei: D:/GIT/dxf2gcode-sourcecode/dxf/test.dxf) (Used Postprocessor: Mach3.cfg) (Beschreibung des Ausgabeformats: G-CODE for Mach3) (Zeit: Thu Jan 30 18:55:03 2025) and (Generated with: DXF2GCODE) (Version: Py3.11.1 PyQt5.15.8, Date: $Date$) (Erstellt aus...

12labs created ticket #167

12labs — Thu, 30 Jan 2025 16:29:48 -0000

Postprocessor not applied if multiple avaliable

chrisko posted a comment on ticket #166

chrisko — Wed, 29 Jan 2025 16:44:11 -0000

Hi Patrick, 1.) Automated Cutting Direction: right now the cutting direction can be set automatically in CW direction for closed shapes (I think thats standard). Making this a selectable option shouldn't be that hard. Here you find the interesting Code for that. algorithm: https://sourceforge.net/p/dxf2gcode/sourcecode/ci/master/tree/source/dxf2gcode/core/shape.py#l128 Setting the direction: https://sourceforge.net/p/dxf2gcode/sourcecode/ci/master/tree/source/dxf2gcode/core/shape.py#l170 2.) Shape...

Patrick Bagnall created ticket #166

Patrick Bagnall — Wed, 29 Jan 2025 16:16:22 -0000

feature requests

chrisko posted a comment on merge request #24

chrisko — Sun, 08 Dec 2024 18:51:06 -0000

Hi, there was nothing to merge. But i did it :-)

chrisko merged merge request #24 on SourceCode

chrisko — Sun, 08 Dec 2024 18:50:46 -0000

Peter Martin created merge request #24 on SourceCode

Peter Martin — Wed, 04 Dec 2024 14:01:30 -0000

dxf2gcode updated /linux.installer.read_me.txt

dxf2gcode — Sat, 23 Nov 2024 08:05:04 -0000

dxf2gcode updated /linux.installer.read_me.txt

dxf2gcode — Sat, 23 Nov 2024 07:40:02 -0000

dxf2gcode updated /linux.installer.sh

dxf2gcode — Sat, 23 Nov 2024 07:39:02 -0000

dxf2gcode updated /linux.installer.sh

dxf2gcode — Tue, 19 Nov 2024 13:57:02 -0000

dxf2gcode updated /linux.installer.read_me.txt

dxf2gcode — Tue, 19 Nov 2024 13:57:02 -0000

dxf2gcode released /Old files/dxf2gcode_old_2024-11-02.zip

dxf2gcode — Mon, 18 Nov 2024 22:57:03 -0000